 |
Resources for Steel Design 2nd Edition
By the ASCE Structural Engineering Institute’s Committee on Design of Steel
Building Structures of the Committee on Metals and AISC’s Steel Solutions Center
This information is based on an article that appeared in Modern Steel Construction, December 2005.
For suggestions on how to locate hard-to-find references, please see Jason Ericksen’s article in MSC Dec 2005 Seeking Sources.
 Click here for a print friendly version of this chart.
Usage: The links to the right will bring you to the documents if it is published by AISC, otherwise the link will guide you to the source contact information at the bottom of this page.
|
[ A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z ]
|
| Anchor Rods and Embedments |
| |
Steel Construction Manual, 13th Edition,
p.14-9. |
AISC |
| |
Steel Design Guide No. 7, Industrial Buildings—Roofs to Anchor
Rods, Second Edition. Fisher, J.M., 2004. |
AISC |
| |
Steel Design Guide No. 1, Column Base Plates.
DeWolf, J. T. and Ricker, D. T., 1990. |
AISC |
| |
Engineering Journal, First Quarter 1985.
"Multiple Bolt Anchorages: Method for Determining the Effective Projected
Area of Overlapping Stress Cones," Marsh, M. L. and Burdette, E. G. |
AISC |
| |
Engineering Journal, First Quarter 1985.
"Anchorage of Steel Building Components to Concrete," Marsh, M. L. and
Burdette, E. G. |
AISC |
| |
Engineering Journal, Third Quarter 1989.
"Some Practical Aspects of Column Base Plate Selection," Ricker, D. T. |
AISC |
| |
ASTM F1554-99 Standard Specification for Anchor
Bolts, Steel, 36, 55, and 105-ksi Yield Strength,
ASTM International. |
ASTM |
 |
| Architecturally
Exposed Structural Steel (AESS) |
|
| |
Code of Standard Practice for Steel Buildings and Bridges (2005): Section 10. |
AISC |
| |
National
Steel Construction Conference Proceedings, 1993, Orlando. "Fabricating
Architecturally Exposed Tube Structures," Kloiber, L. |
AISC |
| |
Modern Steel Construction, May (2003).
"Architecturally Exposed Structural Steel Supplement." |
AISC |
|
| Base Plates |
|
| |
Steel Construction Manual, 13th Edition,
Part 14. |
AISC |
| |
Steel Design Guide No. 1, Column Base Plates. DeWolf, J. T. and Ricker, D. T., 1990. |
AISC |
| |
Engineering Journal, First Quarter 1999.
"Beam-Column Base Plate Design—LRFD Method," Drake, R.M. and Elkin, S.J. |
AISC |
| |
Engineering Journal, Second Quarter 2000.
"Errata: Beam-Column Base Plate Design—LRFD Method," Drake, R.M. and Elkin,
S.J. |
AISC |
| |
Engineering Journal, Third Quarter 1989.
"Some Practical Aspects of Column Base Plate Selection," Ricker, D. T. |
AISC |
| |
Salmon, C. G. and Johnson, J. E. Steel Structures:
Design and Behavior. Fourth Edition, Section 13.9.
New York: Harper Collins College Publishers, 1996. |
|
| |
Steel Tips, "Practical Design and
Detailing of Steel Column Base Plates." Honeck, W.C. and Westphal, D.,
1999. |
SSEC |
|
| Beams and Girders |
|
| |
Steel Construction Manual, 13th Edition,
Part 3. |
AISC |
| |
Specification for Structural Steel Buildings
(March 9, 2005): Chapter F. |
AISC |
| |
Salmon, C. G. and Johnson, J. E. Steel Structures:
Design and Behavior, Fourth Edition, Chapters 11
and 13. New York: Harper Collins College Publishers, 1996. |
|
| |
Geschwindner, L. F., Disque, R. O. and Bjorhovde, R. Load
and Resistance Factor Design of Steel Structures,
Chapter 7. Englewood Cliffs, NJ: Prentice-Hall, 1994. |
OOP |
|
| Beam-Columns |
|
| |
Steel Construction Manual, 13th Edition,
Part 6. |
AISC |
| |
Specification for Structural Steel Buildings
(March 9, 2005): Chapter H. |
AISC |
| |
Engineering Journal, Second Quarter 2000.
"A New Approach for Design of Steel Beam-Columns," Aminmansour, A. |
AISC |
| |
Engineering Journal, Third Quarter 1986.
"Combined Shear and Tension Stresses," Goel, Subhash C. |
AISC |
| |
Galambos, T. V., Ed. Guide to Stability Design
Criteria for Metal Structures, Fifth Edition. New
York: Wiley-Interscience, 1998. |
|
| |
Brockenbrough, R.L. and Johnston, B.G. USS Steel
Design Manual. Pittsburgh: United States Steel
Corporation, 1981. |
OOP |
| |
Sputo, T. "History of Steel Beam-Column Design." Journal
of Structural Engineering, Vol. 119, No. 2 (1993): American Society of
Civil Engineers, p. 547-557. |
ASCE |
|
| Bearing Plates (see Base
Plates) |
|
|
| Blast Design and Analysis |
|
| |
Mays, G. C. and Smith, P. D., Eds. Blast Effects on
Buildings: Design of Buildings to Optimize Resistance to Blast Loading. Reston, VA: American Society of Civil Engineers (ASCE),
1995. |
ASCE |
| |
Task Committee on Blast Resistant Design, Petrochemical Committee of the
Energy Division. Design of Blast Resistant Buildings in
Petrochemical Facilities. Reston, VA: American
Society of Civil Engineers (ASCE), 1997. |
ASCE |
| |
Design of Structures to Resist Nuclear Weapons Effects. ASCE Manuals and Reports, No. 42. Reston, VA: American Society of Civil
Engineers (ASCE), 1985. |
ASCE |
| |
Conrath, E. J., Krauthammer, T., Marchand, K. A. and Mlakar, P.F., Eds. Structural Design for Physical Security: State of the Practice, Committee Report. Reston, VA: American Society of Civil Engineers (ASCE), 1999. |
ASCE |
| |
Cooper, P. W. Explosives Engineering. Wiley-VCH, 1997. |
|
| |
Baker, W. E., Cox, P. A., Westine, P. S., Kulesz, J. J. and Strelow, R.
A. Explosion Hazards and Evaluation. Elsevier Scientific Publishing Co., 1983. |
OOP |
| |
Smith, P. D. and Hetherington, J.G. Blast and
Ballistic Loading of Structures.
Butterworth-Heinemann Ltd, 1994. |
OOP |
| |
Protective Technology Center, www.ptc.psu.edu |
|
|
| Block
Shear |
|
| |
Specification for Structural Steel Buildings
(March 9, 2005): Section J4. |
AISC |
| |
Journal of Structural Engineering,
"Strength of Double-Row Bolted Web Connections." Ricles, J.M and Yura J.A.
Reston, VA: American Society of Civil Engineers (ASCE), 1983. |
ASCE |
| |
Engineering Journal, Fourth Quarter 1978.
"Behavior of Bearing-Critical Double Angle Beam Connections," Birkemoe, P.C
and Gilmor, M.I. |
AISC |
| |
Engineering Journal, Second Quarter 1985.
"New Design Criteria for Gusset Plates in Tension," Hardash, S.G. and Bjorhovde, R. |
AISC |
| |
Engineering Journal, Fourth Quarter 2001.
"AISC LRFD Rules for Block Shear in Bolted Connections—A Review," Kulak, G. L
and Grondin, G. Y. |
AISC |
|
| Bolts |
|
| |
Steel Construction Manual, 13th Edition,
Part 7. |
AISC |
| |
Specification for Structural Joints Using ASTM A325 or A490
Bolts, 2004. |
RCSC/AISC |
| |
Steel Design Guide No. 17, High Strength Bolts: A Primer for
Structural Engineers. Kulak, G., 2002. |
AISC |
| |
Guide to Design Criteria for Bolted and Riveted Joints, Second Edition, Kulak, G. L., Fisher, J. W. and Struik, J. H.
A., 2001. |
RCSC/AISC |
| |
Engineering Journal, First Quarter 1973.
"Bolt Tension Control with a Direct Tension Indicator," Struik, J.H.,
Oyeledun, A.O. and Fisher, J.W. |
AISC |
| |
Engineering Journal, Third Quarter 1991.
"Reuse of A325 and A490 High-Strength Bolts," Bowman, M.D. and Betancourt,
M. |
AISC |
| |
Structural Bolting Handbook. Novi, MI:
Steel Structures Technology Center, 1999. |
SSTC |
| |
Bickford, J.H. and Nassar, S. Handbook of Bolts and
Bolted Joints. New York: Marcel Dekker Inc.,
1998. |
|
| |
Bickford, J.H. An Introduction to the Design and
Behavior of Bolted Joints. New York: Marcel Dekker
Inc., 1995. |
|
|
| Bracing |
|
| |
Steel Construction Manual, 13th Edition,
Part 13. |
AISC |
| |
Engineering Journal, "Forces on Bracing
Systems." Nair, R. S., First Quarter 1992. |
AISC |
| |
Engineering Journal, "The Importance of
Tension Chord Bracing." Fisher, J. M., Third Quarter 1983. |
AISC |
| |
Engineering Journal, Fourth Quarter 1985.
"A Unified Approach For Stability Bracing Requirements," Lutz, L. A. and
Fisher, J. M. |
AISC |
| |
Engineering Journal, First Quarter 2001.
"Fundamentals of Beam Bracing." Yura, J.A. |
AISC |
| |
National Steel Construction Conference Proceedings, 1996, Phoenix. "Design Guidelines for Continuous Beams
Supporting Steel Joist Roof Structures," Rongoe, J. |
AISC |
| |
Ricles,
J.M. and Walsh, D. "Is Your Structure Suitably Braced?" Gainesville, FL:
Structural Stability Research Council (SSRC), University of Florida,
1993. |
SSRC |
|
| Buckling (see Stability) |
|
|
| Cables and Catenary Structures |
|
| |
Structural Applications for Steel Cables for Buildings, ASCE 19-96. Reston, VA: American Society of Civil Engineers
(ASCE), 1997. |
ASCE |
| |
Broughton, P. and Ndumbaro, P. The Analysis of Cable
and Catenary Structures. Thomas Telford Services,
Ltd., 1994. |
|
| |
Irvine, M. Cable Structures.
Dover Publications, 1992. |
OOP |
| |
Scalzi, J.B., Podolny, Jr., W. and Teng, W.C. Design
Fundamentals of Cable Roof Structures. United
States Steel Corporation, 1969. |
OOP |
|
| Cambering |
|
| |
Code of Standard Practice for Steel Buildings and Bridges (2005): Section 6.4. |
AISC |
| |
Engineering Journal, Fourth Quarter 1989.
"Cambering Steel Beams," Ricker, D. T. |
AISC |
| |
National Steel Construction Conference Proceedings, 1990, Kansas City. "Economical Use of Cambered Steel Beams,"
Larson, J. W., and Huzzard, R. K. |
AISC |
| |
Kloiber, L.A. "Cambering of Steel Beams." Steel
Structures Proceedings, Structures Congress 1989.
San Francisco: American Society of Civil Engineers (ASCE), 1989. |
ASCE |
| |
A6/A6M-04a, Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet
Piling, ASTM International. |
ASTM |
|
| Castellated Beams |
|
| |
Steel Design Guide No. 2, Steel and Composite Beams with Web
Openings. Darwin, D., 1990. |
AISC |
| |
Engineering Journal, Third Quarter 1964.
"Castellated Beams—New Development," Boyer, J. P. |
AISC |
| |
Engineering Journal, Third Quarter 1974.
"Lateral Instability of Castellated Beams," Pattanayak, U. C. and Chesson, E.
Jr. |
AISC |
| |
Engineering Journal, Fourth Quarter 1971.
"Simplified Plastic Analysis for Reinforced Web Holes," Redwood, R. G. |
AISC |
| |
Engineering Journal, First Quarter 1972.
"Tables for Plastic Design of Beams with Rectangular Holes," Redwood, R.
G. |
AISC |
| |
Specification for Structural Steel Beams with Web Openings, SEI/ASCE 23-97. Reston, VA: American Society of Civil
Engineers (ASCE). |
ASCE |
| |
Blodgett, O. Design of Welded Structures, Section 4.7. Cleveland: The James F. Lincoln Welding
Foundation, 1996. |
JFLF |
|
| Cladding Supports |
|
| |
Steel Design Guide No. 3, Serviceability Design Considerations
for Steel Buildings, Second Edition. Fisher, J.M. and
West, M.A., 2003. |
AISC |
| |
Steel Tips, "Exterior Wall Connections to
Steel Framing." Steel Committee of California, 1989. |
SSEC |
|
| Coatings |
|
| |
Designing with Structural Steel—A Guide for Architects, Second Edition, 2002. |
AISC |
| |
Proceedings of the AISC National Engineering Conference, 1954. "Shop Paint and Painting Practice," Bigos, J., Smith,
G.W., Ball, E.F. and Foehl, P.J. |
AISC |
| |
Steel Structures Painting Manual, Volume 1, Good Painting
Practice, Fourth Edition. Pittsburgh: Society for
Protective Coatings, 2000. |
SSPC |
| |
Steel Structures Painting Manual, Volume 2, Systems &
Specifications, Eighth Edition. Pittsburgh: Society for
Protective Coatings, 2005. |
SSPC |
| |
Lead-Based Paint Operations and Maintenance Work Practices
Manual for Homes and Buildings. National Institute of
Building Sciences (NIBS), 1995. |
NIBS |
| |
Guide Specifications for Reducing Lead-Based Paint Hazards. National Institute of Building Sciences (NIBS), 1995. |
NIBS |
|
| Cold-Formed Steel Structures |
|
| |
Load and Resistance Factor Design (LRFD) Cold-Formed Steel
Design Manual. Washington D.C.: American Iron and Steel
Institute (AISI), 2002. |
AISI |
| |
North
American Specification for the Design of Cold-Formed Steel Structural
Members. Washington D.C.: American Iron and Steel Institute (AISI),
2001. |
AISI |
| |
Standard for Cold-Formed Steel Framing—General Provisions. Washington D.C.: American Iron and Steel Institute (AISI),
2001. |
AISI |
| |
Standard for Cold-Formed Steel Framing—Truss Design. Washington D.C.: American Iron and Steel Institute (AISI),
2001. |
AISI |
| |
Cold-Formed Steel Framing Design Guide.
Washington D.C.: American Iron and Steel Institute (AISI), 2001. |
AISI |
| |
Yu, W. W. Cold-Formed
Steel Design, Third Edition. New York:
Wiley-Interscience, 2000. |
|
| |
Design: Cold-Formed Load Bearing Steel Systems and Masonry
Veneer/Steel Stud Walls, USACE 3-310. U.S. Army Corps of
Engineers, 2005. |
USACE |
| |
ANSI/ASCE 8, Specification of Cold-Formed Stainless
Steel Members. Reston, VA: American Society of
Civil Engineers (ASCE), 2003. |
ASCE |
| |
American Iron and Steel
Institute |
AISI |
|
| Columns |
|
| |
Steel Construction Manual, 13th Edition,
Part 4. |
AISC |
| |
Bjorhovde, R. "Compression Members," Chapter 2.3. Constructional
Steel Design—An International Guide. Dowling, P.
J., Harding, J. E. and Bjorhovde, R., Eds. London: Elsevier Applied Science,
1992. |
|
| |
Engineering Journal, Second Quarter 1995.
"A Practical Approach to the "Leaning Column," Geschwindner, L. F. |
AISC |
| |
Engineering Journal, First Quarter 1988.
"Columns: From Theory to Practice," Bjorhovde R. |
AISC |
| |
Engineering Journal, First Quarter 1984.
"Effect of End Restraint on Column Strength: Practical Applications,"
Bjorhovde R., |
AISC |
| |
Engineering Journal, Second Quarter 1971.
"The Effective Length of Columns in Unbraced Frames," Yura, J. A. |
AISC |
| |
Engineering Journal, Fourth Quarter 1972.
"Discussions and Closure of the Effective Length of Columns in Unbraced
Frames," Yura, J. A. |
AISC |
| |
Galambos, T. V., Ed. Guide to Stability Design
Criteria for Metal Structures, Fifth Edition. New
York: Wiley-Interscience, 1998. |
SSRC |
| |
Geschwindner, L. F., Disque, R. O. and Bjorhovde, R. Load
and Resistance Factor Design of Steel Structures,
Chapter 6. Englewood Cliffs, NJ: Prentice-Hall, 1994. |
|
|
| Combined Loading (see
Beam-Columns) |
|
|
| Composite Construction |
|
| |
Steel Construction Manual, 13th Edition,
Parts 3 and 4. |
AISC |
| |
Specification for Structural Steel Buildings
(March 9, 2005): Chapter I. |
AISC |
| |
Salmon, C. G. and Johnson, J. E. Steel Structures,
Design and Behavior, Fourth Edition, Chapter 16.
New York: Harper Collins College Publishers, 1996. |
|
| |
Viest, I. M., Ed. Composite Construction Design for
Buildings. New York: McGraw-Hill/ASCE, 1997. |
|
| |
ANSI/ASCE 3-91 Standard for the Structural Design of
Composite Slabs. Reston, VA: American Society of
Civil Engineers (ASCE), 1991. |
ASCE |
| |
ANSI/ASCE 9-91 Standard Practice for the Construction
and Inspection of Composite Slabs. Reston, VA:
American Society of Civil Engineers (ASCE), 1991. |
ASCE |
|
| Connection Design – General |
|
| |
Steel Construction Manual, 13th Edition,
Parts 7-15. |
AISC |
| |
Specification for Structural Steel Buildings
(March 9, 2005): Chapter J. |
AISC |
| |
Steel Design Guide No. 13, Stiffening of Wide-Flange Columns
at Moment Connections: Wind and Seismic Applications.
Carter, C.J., 1999. |
AISC |
| |
National Steel Construction Conference Proceedings, 1990, Kansas City. "Box-Tube Connections; Choices of Joint
Details and Their Influence on Costs," Post, J. W. |
AISC |
| |
Bjorhovde, R., Brozzetti, J. and Colson, A. Connections
in Steel Structures I: Behavior, Strength and Design.
Elsevier Applied Science, 1988. |
|
| |
Bjorhovde, R., Colson, A., Haaijer, G. and Stark, J.W.B. Connections in Steel Structures II: Behavior, Strength and
Design. American Institute of Steel Construction
(AISC), 1992. |
|
| |
Bjorhovde, R., Colson, A. and Zandonini, R. Connections
in Steel Structures III: Behavior, Strength and Design. Pergamon, 1996. |
OOP |
| |
Leon, R.T. and Easterling, W. S. Connections in Steel
Structures IV: Behavior, Strength and Design.
Chicago: American Institute of Steel Construction (AISC), 2002. |
OOP |
| |
Tamboli, A.R. Handbook of Structural Steel Connection
Design and Details. McGraw-Hill, 1999. |
|
| |
Thornton, W.A., and Kane, T., "Connections," Section 5, Structural Steel Designers Handbook,
Third Edition. Brockenbrough, R.L. and Merritt, F.S., Eds., New York: McGraw
Hill, 1999. |
|
|
| Connection Design –
Eccentricity |
|
| |
Steel Construction Manual, 13th Edition,
pp. 7-6 and 8-9. |
AISC |
| |
Engineering Journal, Fourth Quarter 1987.
"Design for Eccentric and Inclined Loads on Bolt and Weld Groups," Iwankiw,
N. R. |
AISC |
| |
Engineering Journal, Fourth Quarter 1984.
"Nonlinear Analysis of Eccentric Bolted Connections," Rutenberg, A. |
AISC |
| |
Crawford, S. F. and Kulak, G. L. "Eccentrically Loaded Bolted
Connections." Journal of the Structural Division, American Society of Civil Engineers (ASCE), Vol. 97, No. ST3,
March (1971): pp. 765-784. |
ASCE |
| |
Kloiber, L. A. and Thornton, W. "Design Approaches to Shear Connections
for Skewed Members in Steel Structures." Proceedings of
the Sessions Related to Steel Structures, SEI/ASCE
Structures Congress, Portland, pp. 282-289, 1997. |
ASCE |
|
| Connection Design –
Hollow Structural Sections |
|
| |
Steel Construction Manual, 13th Edition,
Part 10 |
AISC |
| |
National Steel Construction Conference Proceedings, 1989, Nashville. "Gaining Confidence with the Fabrication,
Welding and Inspection of Tubular Connections," Post, J. W. |
AISC |
| |
Engineering Journal, Fourth Quarter 2000.
"Gusset Plate Connection to Round HSS Tension Members," Cheng, J.J.R. and
Kulak, G.L. |
AISC |
| |
National Steel Construction Conference Proceedings, 1990, Kansas City. "Box-Tube Connections; Choices of Joint
Details and Their Influence on Costs," Post, J. W. |
AISC |
| |
AWS D1.1 Structural Welding Code—Steel. Miami: American Welding Society (AWS), 2004. |
AWS |
| |
Packer, J. A. and Henderson, J. E. Hollow Structural
Section Connections and Trusses: A Design Guide.
Willowdale, Canada: Canadian Institute of Steel Construction, 1997. |
CISC |
| |
Constructional Steel Design—An International Guide, Chapter 3.5. Dowling, P. J., Harding, J. E. and Bjorhovde,
R., Eds. London: Elsevier Applied Science, 1990. |
|
|
| Connection Design –
Moment (see also Seismic Design) |
|
| |
Steel Construction Manual, 13th Edition,
Part 12 |
AISC |
| |
Engineering Journal, First Quarter 1975.
"Directional Moment Connections," Disque, R.O. |
AISC |
| |
Tamboli, A.R. Handbook of Structural Steel Connection
Design and Details. McGraw-Hill, 1999. |
|
|
| Connection Design – Seated
Connections |
|
| |
Steel Construction Manual, 13th Edition,
pp. 10-84 |
AISC |
|
| Connection Design – Shear Tab |
|
| |
Steel Construction Manual, 13th Edition,
Part 10 |
AISC |
| |
Engineering Journal, First Quarter
1989. "Design of Single Plate Shear
Connections," Astaneh-Asl, A., Liu J. and McMullin, K.M. |
AISC |
| |
Liu, J. and Astaneh-Asl, A. "Cyclic Testing of Simple Connections,
Including Effects of the Slab." Journal of Structural
Engineering, ASCE, Vol. 126, No. 1 (2000): pp.
32-39. |
ASCE |
| |
Leon, R.T. and Easterling, W. S. Connections in Steel
Structures IV: Behavior, Strength and Design.
Chicago: American Institute of Steel Construction (AISC), 2002. |
OOP |
| |
Astaneh-Asl,
A., Liu J. and McMullin, K.M. "Behavior and Design of Single Plate Shear
Connections," 58 (2002): pp.1121-1141. |
Elsevier |
|
| Connection Design – Skewed
Connections |
|
| |
Steel Construction Manual, 13th Edition,
p. 10-149. |
AISC |
| |
Engineering Journal, Third Quarter 2001.
"Design of Skewed Connections," Kloiber, L. and Thornton, W.A. |
AISC |
| |
National Steel Construction Conference Proceedings, 1999, Toronto. "Connections for Skewed Beams," Kloiber, L.
and Thornton, W.A. |
AISC |
| |
Kloiber, L. A. and Thornton, W.
"Design Approaches to Shear Connections for Skewed Members in Steel
Structures." Proceedings of the Sessions Related to Steel
Structures, SEI/ASCE Structures Congress, Portland
(1997): pp. 282-289. |
ASCE |
|
| Connection Design –
Stiffened Seated Connections |
|
| |
Steel Construction Manual, 13th Edition,
p. 10-92. |
AISC |
| |
Engineering Journal, Fourth Quarter 1999.
"Design Criteria for Stiffened Seated Connections to Column Webs," Ellifritt,
D. S. and Sputo, T. |
AISC |
| |
Engineering Journal, First Quarter 2000.
"Errata: Design Criteria for Stiffened Seated Connections to Column Webs,"
Ellifritt, D. S. and Sputo, T. |
AISC |
|
| Connection Design – Wind |
|
| |
Steel Construction Manual, 13th Edition,
Part 11. |
AISC |
| |
Engineering Journal, Second Quarter 1964.
"Wind Connections with Simple Framing," Disque, R.O. |
AISC |
|
| Coped Beams |
|
| |
Steel Construction Manual, 13th Edition,
p. 9-15. |
AISC |
| |
Cheng,
J.J., Yura, J.A. and Johnston, C.P. "Design and Behavior of Coped Beams."
Austin, TX: Department of Civil
Engineering, The University of Texas, 1984. |
AISC |
|
| Corrosion (see also
Galvanizing and Metallizing) |
|
| |
"Interior
Corrosion of Structural Steel Closed Sections," Association of Iron and Steel
Engineers (AISE) Bulletin, No. 18. Pittsburgh: AISE, 1970. |
AIST* |
| |
National Association
of Corrosion Engineers |
NACE |
| |
Corrosion Source, www.corrosionsource.com |
|
| |
Society for Protective Coatings, www.sspc.org |
|
|
| Cranes and Crane Runways |
|
| |
Steel Design Guide No. 7, Industrial Buildings: Roofs
to Column Anchorage. Fisher, J.M., 2002. |
AISC |
| |
Engineering Journal, Fourth Quarter 1982.
"Tips for Avoiding Crane Runway Problems," Ricker, D. T. |
AISC |
| |
Engineering Journal, Second Quarter 2002.
"Design Concepts for Jib Cranes," Fisher, J.M. and Thomas, S.J. |
AISC |
| |
National Steel Construction Conference Proceedings, 2000, Las Vegas. "New Fatigue Provisions for the Design of
Crane Runway Girders," Fisher, J.M. and Van de Pas, J.P. |
AISC |
| |
National Steel Construction Conference Proceedings, 1996, Phoenix. "Crane Runway Design," Van de Pas, J.P. and
Fisher, J.M. |
AISC |
| |
"Guide
for the Design and Construction of Mill Buildings," Association of Iron and
Steel Engineers (AISE) Technical Report, No. 13. Pittsburgh: AISE, 2003. |
AIST* |
| |
Specifications for Top Running and Under Running Single Girder
Electric Traveling Cranes Utilizing Under Running Trolley Hoists, CMAA Specification 74. McLean, VA: Crane Manufacturers
Association of America, 2000 ed. |
CMAA |
|
| Curved Beams and Girders |
|
| |
Steel Design Guide No. 9, Torsional Analysis of Structural
Steel Members. Seaburg, P.A. and Carter, C.J., 1997. |
AISC |
| |
Engineering Journal, Second Quarter 1970.
"Straight Element Grid Analysis of Horizontally Curved Beam Systems,"
Wiessman, H. A. |
AISC |
| |
Brookhart, G. C. "Circular-Arc I-Type Girders." Journal
of the Structural Division, American Society of
Civil Engineers (ASCE), Vol. 93, ST6, December (1976): pp. 133-159. |
ASCE |
| |
Guide
Specifications for Horizontally Curved Highway Bridges. Washington, D.C.:
American Association of State Highway and Transportation Officials (AASHTO),
2003. |
AASHTO |
|
| Deck |
|
| |
Design Manual for Composite Decks, Form Decks and Roof Decks, Publication No. 30. Fox River Grove, IL: Steel Deck Institute, 2001. |
SDI |
| |
ANSI/ASCE 3-91 Standard for the Structural Design of
Composite Slabs. Reston, VA: American Society of
Civil Engineers (ASCE), 1991. |
ASCE |
| |
Fisher, J. M., West, M. A. and Van De Pas, J. P. Designing with Vulcraft
Steel Joists, Joist Girders and Steel Deck, 2nd
Edition. Charlotte, NC: Nucor
Corporation, 2002. |
NUCOR |
| |
Steel Deck Institute |
SDI |
|
| Deflections (see also Serviceability) |
|
| |
Steel Design Guide No. 3, Serviceability Design Considerations
for Steel Buildings, Second Edition. Fisher, J.M. and
West, M.A., 2003. |
AISC |
| |
Engineering Journal, Third Quarter
1986. "Ponding of Concrete Deck Floors," Ruddy, J. L. |
AISC |
|
| Design Drawings |
|
| |
Code of Standard Practice for Steel Buildings and Bridges (2005): Section 3. |
AISC |
| |
"National
Practice Guidelines for the Structural Engineer of Record," Document #962,
Council of American Structural Engineers (CASE). Washington D.C.: ACEC Publications,
1997. |
CASE |
| |
"National
Practice Guidelines for Specialty Structural Engineers," Document #962-B,
Council of American Structural Engineers (CASE). Washington D.C.: ACEC
Publications, 1996 |
CASE |
| |
Troup,
E.W.J. "Contract Documents: Key to Quality Shop Drawings for Structural
Steel." Structure, Spring (1997): National Council of Structural Engineers
Associations, pp. 14-19. |
NCSEA |
| |
"A
Guideline Addressing Coordination and Completeness of Structural Construction
Documents," Document #962-D, Council of American Structural Engineers (CASE).
Washington D.C.: ACEC Publications, 2003 |
CASE |
|
| Design Loads (see Loads) |
|
|
| Detailing Practices |
|
| |
Detailing for Steel Construction, Second
Edition, 2003. |
AISC |
|
| Diaphragms |
|
| |
Lutrell, L. D. Steel Deck Institute (SDI) Diaphragm
Design Manual, Third Edition. Steel Deck Institute
(SDI), 2004. |
SDI |
| |
ANSI/ASCE 3-91 Standard for the Structural Design of
Composite Slabs. Reston, VA: American Society of
Civil Engineers (ASCE), 1991. |
ASCE |
| |
"IMSA
Steel Floor and Roof Deck." Evaluation Report, ER-2757. Whittier, CA: ICBO
Evaluation Service, Inc., 2001. |
ICBO/ICC |
|
| Drift |
|
| |
Steel Design Guide No. 3, Serviceability Design Considerations
for Steel Buildings, Second Edition. Fisher, J.M. and
West, M.A., 2003. |
AISC |
| |
Task Committee on Drift Control of Steel Building Structures. "Wind Drift
Design of Steel-Framed Buildings: State of the Art Report." Journal of Structural Engineering,
American Society of Civil Engineers (ASCE), Vol. 114, No. 9, September
(1988): pp. 2085-2108. |
ASCE |
|
| Economical Design
Considerations |
|
| |
Modern Steel Construction, April (2000).
"Economy in Steel." Carter, C.J., Murray, T.M. and Thornton, W.A.: pp.
39-48. |
AISC |
|
| Elevator Beams |
|
| |
Safety Code for Elevators and Escalators,
ANSI/ASME A17.1. New York: American
National Standards Institute (ANSI) and American Society of Mechanical
Engineers (ASME), 2005. |
ASME |
| |
Committee on Design of Steel Building Structures. "Compendium of Design
Office Problems." Journal of Structural Engineering, American Society of Civil Engineers (ASCE), Vol. 122, No. 2,
February (1996): pp. 116-124. |
ASCE |
|
| Erection |
|
| |
Code of Standard Practice for Steel Buildings and Bridges (2005): Section 7. |
AISC |
| |
Steel Design Guide No. 10, Erection Bracing of Low Rise
Structural Steel Buildings. Fisher, J.M. and West, M.A.,
1997. |
AISC |
| |
National Engineering Conference Proceedings,
1995, San Antonio. "Erection Bracing of Structural Steel Frames," Fisher, J.
M. and West, M. A. |
AISC |
| |
Code of Federal Regulations, Title 29,
Part 1926, Subpart R. Washington D.C.: U.S. Government Printing Office,
2001. |
OSHA |
|
| Expansion Joints |
|
| |
Steel Construction Manual, 13th Edition,
p. 2-31. |
AISC |
| |
Expansion Joints in Buildings: Federal Construction Council
Technical Report No. 65. Washington D.C.: National
Academy of Sciences, National Research Council, 1974. |
NAS |
|
| Fatigue |
|
| |
Steel Construction Manual, 13th Edition,
p. 2-33. |
AISC |
| |
Engineering Journal, First Quarter 1977.
"Fracture and Fatigue Control in Steel Structures," Rolfe, S.T. |
AISC |
| |
Engineering Journal, Second Quarter 1996.
"Fatigue Life of Double Angle Tension Members," Christopher, B.P., Cousins,
T.E. and Stallings, J.M. |
AISC |
| |
Fisher, J. W., Kulak, G. L. and Smith, I. F. C. A
Fatigue Primer for Structural Engineers. National
Steel Bridge Alliance (NSBA), 1998. |
NSBA/AISC |
| |
Fisher, J. W. Fatigue and Fracture in Steel Bridges. New York: Wiley, 1984. |
|
| |
Barsom, J. M., and Rolfe, S. T. Fracture and Fatigue
Control in Structures: Applications of Fracture Mechanics, Third Edition. West Conshohocken, PA: American Society for
Testing and Materials (ASTM), 1999. |
ASTM |
|
| Fire Protection Engineering |
|
| |
Engineering Journal, First Quarter 2000.
"Design of Concrete-Filled Hollow Structural Steel Columns for Fire
Endurance," Kodur, V. K. R. and Mackinnon, D. H. |
AISC |
| |
Engineering Journal, Second Quarter 2001.
"Restrained Fire Resistance Ratings in Structural Steel Buildings," Gewain,
R. G. and Troup, E. W. J. |
AISC |
| |
Lie, T. T. Structural Fire Protection. American Society of Civil Engineers (ASCE) Practice Manual,
No. 78. New York: ASCE, 1992. |
ASCE |
| |
Standard Calculation Methods for Structural Fire Protection, SEI/ASCE/SFPE 29-99. Reston, VA: Structural Engineering
Institute of the American Society of Civil Engineers, 2003. |
ASCE |
| |
The SFPE Handbook of Fire Protection Engineering, Third Edition. Bethesda, MD: Society of Fire Protection
Engineers, 2002. |
SFPE |
| |
Fire Protection Handbook, 2003 Edition.
Quincy, MA: National Fire Protection Association, 2003. |
NFPA |
| |
"Fire-Resistance-Rated Construction." International
Building Code, Chapter 7. Falls Church, VA,
2003. |
ICBO/ICC |
| |
Schleich, J., Bouillette, J., Hass, R., Preston, R. and Sandman, T. International Fire Engineering Design for Steel Structures:
State of the Art. Brussels, Belgium: International Iron and Steel Institute (IISI),
1993. |
IISI |
| |
Buchanan, A. H. Structural Design for Fire Safety. John Wiley and Sons Ltd., 2001. |
|
| |
Wang, Y. C. Steel and Composite Structures: Behavior
and Design for Fire Safety. Spoon Press,
2002. |
|
| |
World Trade Center Building Performance Study: Data
Collection, Preliminary Observations, and Recommendations,
FEMA 403. Washington D.C.: Federal Emergency Management Agency (FEMA),
2002. |
FEMA |
| |
Fire-Safe Structural Steel: A Design Guide.
Washington D.C.: American Iron and Steel Institute (AISI), 1979. |
AISI |
| |
Underwriters Labatories Inc., www.ul.com |
|
| |
National Fire Protection Association, www.nfpa.org |
|
|
| Fire Resistant Design |
|
| |
Steel Construction Manual, 13th Edition,
Appendix 4. |
AISC |
| |
Steel Design Guide No. 19, Fire Resistance of Structural Steel
Framing, Ruddy, J.L., Marlo, J.P., Loanneides, S.A.,
Alfawakhiri, F. |
AISC |
| |
Engineering Journal, Second Quarter 2001.
"Restrained Fire Resistance Ratings in Structural Steel Buildings," Gewain,
R. G. and Troup, E. W. J. |
AISC |
| |
Designing Fire Protection for Steel Beams.
Washington D.C.: Subcommittee on Fire Technology of the Committee on
Construction Codes and Standards, American Iron and Steel Institute (AISI),
1984. |
AISI |
| |
Designing Fire Protection for Steel Columns,
Third Edition. Washington, D.C.: Subcommittee on Fire Technology of the
Committee on Construction Codes and Standards, American Iron and Steel
Institute (AISI), 1980. |
AISI |
| |
Designing Fire Protection for Steel Trusses,
Second Edition. Washington, D.C.: Subcommittee on Fire Technology of the
Committee on Construction Codes and Standards, American Iron and Steel
Institute (AISI), 1991. |
AISI |
| |
Boring, D. F., Spence, J.C. and Wells, W. G. Fire
Protection Through Modern Building Codes, Fifth
Edition. Washington D.C.: American Iron and Steel Institute (AISI),
1981. |
AISI |
| |
Standard Calculation Methods for Structural Fire Protection, SEI/ASCE/SFPE 29-99. Reston, VA: Structural Engineering
Institute of the American Society of Civil Engineers, 2003. |
ASCE |
| |
GA-600 Fire-Resistance
Design Manual. Washington D.C.: Gypsum Association,
2000. |
|
| |
Fire Resistance
Directory, Volume I. Northbrook, IL: Underwriters
Laboratories Inc., 2001. |
UL |
| |
Directory of Listed
Products. Cortland, NY: Intertek Testing Services NA
Inc., 2000. |
ITSNA |
| |
Directory of Listed Building Products, Materials and
Assemblies, Volume II. Elmendorf, TX: Omega Point
Laboratories Inc., 2001. |
OPL |
|
| Floor Vibration (see Vibration) |
|
|
| Fracture |
|
| |
Steel Construction Manual, 13th Edition,
p. 2-33. |
AISC |
| |
Fisher, J. W., Kulak, G. L. and Smith, I. F. C. A
Fatigue Primer for Structural Engineers. National
Steel Bridge Alliance (NSBA), 1998. |
NSBA/AISC |
| |
Engineering Journal, First Quarter 1977.
"Fracture and Fatigue Control in Steel Structures," Rolfe, S.T. |
AISC |
| |
Fisher, J.W. Fatigue and Fracture of Steel Bridges:
Case Studies. Hoboken, NJ: John Wiley and Sons,
1984. |
|
| |
Barsom, J. M. and Rolfe, S. T. Fracture and Fatigue
Control in Structures, Third Edition. West
Conshohocken, PA: American Society for Testing and Materials (ASTM),
1999. |
ASTM |
|
| Galvanizing and
Metallizing (see also Corrosion) |
|
| |
AWS D19.0 Welding Zinc-Coated Steels. Miami: American Welding Society (AWS), 1972. |
AWS |
| |
"The
Design of Products to be Hot-Dip Galvanized after Fabrication." Engelwood,
CO: American Galvanizers Association (AGA), 2000. |
AGA |
| |
"Recommended
Details for Galvanized Structures." Engelwood, CO: American Galvanizers
Association (AGA), 2002. |
AGA |
| |
"Duplex
Systems: Painting over Hot-Dip Galvanized Steel." Engelwood, CO: American
Galvanizers Association (AGA), 1998. |
AGA |
| |
"Galvanizing
for Corrosion Protection: A Specifier’s Guide." Engelwood, CO: American
Galvanizers Association (AGA), 2000. |
AGA |
| |
"Service
Life Chart for Hot-Dipped Galvanized Coatings." American Galvanizers
Association (AGA). |
AGA |
|
| Gusset Plates |
|
| |
Steel Construction Manual, 13th Edition,
Part 13. |
AISC |
| |
Seismic Provisions for Structural Steel Buildings, 2002. |
AISC |
| |
Engineering Journal, Third Quarter 1990.
"Experimental Study of Gusseted Connections," Gross, J.L. |
AISC |
| |
Engineering Journal, Second Quarter 1985.
"New Design Criteria for Gusset Plates in Tension," Hardash, S.G. and
Bjorhovde, R. |
AISC |
| |
Engineering Journal, Third Quarter 1997.
"The Behavior and Load-Carrying Capacity of Unstiffened Seated-Beam
Connections," Chen, W.F., Bowman, M.D. and Yang, W.H. |
AISC |
| |
Whitmore,
R.E. "Experimental Investigation of Stresses in Gusset Plates" Knoxville, TN:
The University of Tennessee, 1952. |
AISC |
| |
Yam, M.C.H. and Cheng, J.J. "Behavior and Design of Gusset Plate
Connections in Compression." Journal of Constructional
Steel Research, Vol. 58, No. 5-8 (2002): p.
1143-1159. |
Elsevier |
| |
Steel Tips, "Seismic Behavior and Design
of Gusset Plates." Astaneh-Asl, A., 1998. |
SSEC |
|
| Heat Straightening |
|
| |
Engineering Journal, First Quarter 2001.
"What You Should Know About Heat Straightening Repair of Damaged Steel,"
Avent, R.R. and Mukai, D.J. |
AISC |
| |
Modern Steel Construction, February 1995.
"Engineered Heat Straightening Comes of Age." Avent, R. R., p. 32-39. |
AISC |
| |
National Steel Construction Conference Proceedings, 1988, Miami Beach. "Heat Straightening of Steel: From Art to
Science," Avent, R. R. |
AISC |
| |
National Steel Construction Conference Proceedings, 1995, San Antonio. "Engineered Heat Straightening," Avent, R.
R. |
AISC |
| |
National Steel Construction Conference Proceedings, 1992, Las Vegas. "Designing Heat Straightening Repairs,"
Avent, R.R. |
AISC |
| |
Avent, R. R., Mukai, D. J. and Heymsfield, E. "Repair of Localized Damage
in Steel by Heat Straightening." Journal of Structural
Engineering, American Society of Civil Engineers
(ASCE), Vol. 127, No. 10, October (2001): p. 1121-1128. |
ASCE |
| |
Avent, R. R. "Heat Straightening: Fact and Fable." Journal
of Structural Engineering, American Society of
Civil Engineers (ASCE), Vol. 115, No. 11, November (1989): p. 2773-2793. |
ASCE |
| |
Heat-Straightening Repairs of Damaged Steel Bridges, Report No. FHWA-IF-99-004. Federal Highway Administration,
1998. |
FHWA |
| |
North American Steel Construction Conference Proceedings, 2001, Ft. Lauderdale. "Principles and Practice of
Heat-Straightening Repair," Avent, R. R. and Verma, K.K. |
AISC |
|
| Heavy Shapes |
|
| |
Specification for Structural Steel Buildings
(March 9, 2005): Section A3.1. |
AISC |
| |
Engineering Journal, Second Quarter
1987. "Experience with Use of Heavy
W-Shapes in Tension," Fisher, J. W. and Pense, A. W. |
AISC |
| |
Engineering Journal, Third Quarter 1987.
"Material Considerations in Structural Steel Design," Barsom, J. M. |
AISC |
| |
National Steel Construction Conference Proceedings, 1988, Miami Beach. "Solutions for the Use of Jumbo Shapes,"
Bjorhovde, R. |
AISC |
| |
National Steel Construction Conference Proceedings, 2000, Las Vegas. "Through-Thickness Strength of Column
Flanges in Welded Moment Connections," Dexter, R. |
AISC |
| |
Blodgett, O. and Miller, D.K. "The Challenge of Welding Jumbo Shapes." Welding Innovation, James F. Lincoln
Arc Welding Foundation, Vol. X, No.1, 1993. |
JFLF |
|
| Higher Strength Steels |
|
| |
Axmann,
G. "Steels For Seismic Applications: ASTM A913 Grade 50 and Grade 65."
Arcelor International America, 2002. |
Arcelor |
|
| Hollow Structural
Sections (HSS) (see also Connection Design – Hollow Structural Sections) |
|
| |
Steel Construction Manual, 13th
Edition. |
AISC |
| |
Specification for Structural Steel Buildings
(March 9, 2005). |
AISC |
| |
National Steel Construction Conference Proceedings, 1993, Orlando. "Fabricating Architecturally Exposed Tube
Structures," Kloiber, L.A. |
AISC |
| |
Sherman, D. R. Constructional Steel Design—An
International Guide, "Tubular Members." Chapter
2.4. Dowling, P. J., Harding, J. E. and Bjorhovde, R., Eds. London: Elsevier
Applied Science, 1992. |
|
| |
Engineering Journal, Third Quarter 1996.
"Designing with Structural Tubing," Sherman, D.R. |
AISC |
| |
Steel Tube Institute of North America, www.steeltubeinstitute.org |
STI |
|
| Industrial Buildings |
|
| |
Steel Design Guide No. 7, Industrial Buildings—Roofs to Anchor
Rods, Second Edition. Fisher, J.M., 2004. |
AISC |
| |
Roof Framing with Cantilever Girders and Open Web Joists. Willowdale, Canada: Canadian Institute of Steel Construction,
1989. |
CISC |
| |
"Suggested Procedure for Inspecting and Upgrading Existing Structures." Guide for the Design and Construction of Mill Buildings, Association of Iron and Steel Engineers (AISE) Technical
Report, No. 13, Supplement II. Pittsburgh: AISE, 1997. |
AIST* |
|
| Inspection and Structural
Testing |
|
| |
Specification for Structural Joints Using ASTM A325 or A490
Bolts, 2004. |
RCSC/AISC |
| |
"Suggested Procedure for Inspecting and Upgrading Existing Structures." Guide for the Design and Construction of Mill Buildings, Association of Iron and Steel Engineers (AISE) Technical
Report, No. 13, Supplement | |
